Lower pane, Iscsi port summary, Lower pane iscsi port summary – HP 3PAR Operating System Software User Manual
Page 104
Lower Pane
The lower pane provides detail information about a selected port from the upper pane. Information
is presented a Summary tab, a Sessions tab, and a Hosts tab. Each are discussed in detail in the
following:
“iSCSI Port Summary” (page 104)
iSCSI Port Summary
The iSCSI port summary is displayed on the Summary tab.
The following information is provided:
Description
Field
Group
Port location.
Position
General
Indicates whether the port is FC, iSCSI, RCIP, or RCFC.
Type
Rate that data can be transferred over the port (1 Gbps, 2 Gbps
or 4 Gbps). When there is no specified value, no connection exists.
Rate
Type of device that the port is connected to. Free, Disk, Host, Peer,
or InServ.
Connected Device Type
Name of device that the port is connected to, e.g. host1, cage0.
Connected Device
Port firmware mode setting. Ports in Initiator mode are connected
to drive cages and ports in Target mode export to hosts. Suspended
Mode
mode is for target ports that have not yet been initialized by the
system (rare). Peer mode is for Ethernet ports.
Current state of the port.
State
The Media Access Control address for the Ethernet interface.
MAC
The Target Portal Group Tag for the iSCSI target portal group.
TPGT
The throughput in KB/sec.
Total Data Throughput
Resources
For iSCSI ports. Indicates if the Dynamic Host Configuration Protocol
(DHCP) protocol is enabled.
DHCP
IP Settings
104 Working with Ports