HP 3PAR Operating System Software - Manual (Page 152)

Step 1. General
1. In the General group box:
a.
Name - Enter a new host set name.
b. Comments - Enter any notes.
2. Click Next, or click Finish to close the wizard and edit the host set with the information entered.
Step 2. Hosts
1. To assign available hosts:
a.
Select one or more WWNs from the Available hosts list.
b. Click the down arrow to add the selected WWN(s) to the Assigned hosts list.
c. To remove hosts from the Assigned hosts list, select one or more hosts from the Assigned
host list and click the up arrow.
2. Click Next, or click Finish to close the wizard and edit the host set with the information entered.
Step 3. Summary
Review the summary information and when satisfied, click Finish.
Removing Host Sets
To remove a host set or multiple host sets:
1.
Click Hosts in the Manager Pane.
2. In the Management Tree, click Host Sets under the system where the host set(s) you wish to
remove resides.
3. in the Host Sets screen, select the host set(s) you wish to remove.
4. Right-click and then click Remove in the menu that appears.
The Remove Host Set wizard appears.
5. Click OK.
Exporting Virtual Volumes
To export a virtual volume, access the Export Virtual Volume wizard:
1.
Click Hosts or Provisioning in the Manager Pane.
2. If you are working in the Hosts manager, in the Common Actions panel, click Export Volume.
3. If you are working in the Provisioning manager:
a.
Access the Virtual Volumes tab.
b. Right-click the volume you wish to export.
c. In the menu that appears, click Export.
The Export Virtual Volume wizard appears.
Step 1. General
1. Perform the General group box:
a.
System - Select a system from the list.
b. Domain - Select a domain from the list. If not applicable, select <none>.
c. Select either Virtual Volume or Virtual Volume Set.
d. From the virtual volume or virtual volume set list, select the volume(s) to export.
2. Click Next.
152 Working with Host Sets