HP 3PAR Operating System Software - Manual (Page 127)

22 Working with the Host Manager
HP 3PAR Storage Systems automatically detect new physically connected host paths and display
their World-Wide Name (WWN) (for Fibre Channel ports) or iSCSI Name (for iSCSI ports) in the
InForm Management Console. However, you can also use the InForm Management Console to
add new WWNs or iSCSI names for unestablished host paths and assign them to a host before
they are physically connected. This allows a "plug-and-play" functionality that avoids the need for
manual reconfiguration after establishing new host paths.
To work with the Host Manager, see:
“Viewing Host Information” (page 130)
“Working with Hosts” (page 146)
“Working with Host Sets” (page 151)
NOTE: If you are a domain user, only information within the domain(s) you have access to, will
be visible.
If you are a domain user, you can perform any host task via the Domains node in the management
tree. The information and procedures when working in the Domains node are identical to those
under the InServs node, except information is filtered by domain.
127