HP 3PAR Operating System Software - Manual (Page 105)

Description Field Group
IP address of the iSCSI port. IP Address
The address of a local IP router on the same network as the InServ,
used to forward traffic to destinations beyond the local network. Gateway
Netmask address for the iSCSI interface. Subnet Mask
Maximum Transmission Unit. The greatest amount of data or
"packet" size that can be transferred in one physical frame on a MTU
network. MTU setting for the iSCSI port. The default setting is 1500.
When supported by the network, an MTU value of 9000 should
be used.
Data transfer rate. A value of 0 indicates that no data is being
transferred. Rate
The TCP port number used by the iSCSI card. TCP Port
Primary Internet Storage Name Service (iSNS) server IP address.
iSNS protocol allows for automated discovery, management, and
configuration of iSCSI. Primary IP Address iSNS Settings
Secondary iSNS server IP address. Secondary IP Address
The port on the iSNS server with which to communicate. TCP Port
Sessions
The following information is provided:
Description Column
Location of the iSCSI port. Position
IP address of the host that initiated the connection. IP Address
Identifier for the Target Session Identifying Handle (TSIH). TSIH
iSCSI name for the associated iSCSI host path. iSCSI
Number of connections for this session. Connection Count
Time the session started. Start Time
Hosts
The following information is provided:
Description Column
Unique number for the port. Host ID
Name of a host to which the target port connects. Host Name
Name of the domain associated with the host, if applicable. Domain
IP address of the iSCSI port. IP Address
Viewing System RCIP Ports
To view system Remote Copy over IP (RCIP) port information:
1.
Access the Ports screen.
2. In the Management Window, click the RCIP tab.
The RCIP tab appears as follows:
Viewing System Ports 105