HP 3PAR Operating System Software - Manual (Page 320)

NOTE: In the screen output above, the Physical Disks tab has been accessed from the InServs
node (all connected storage server) level on the Management Tree. If the Physical Disks tab was
accessed from the Management Tree via a specific server node (for example, s424), the resulting
information displayed on the Physical Disks tab does not display the System column.
The Cage Subsystems Physical Disks tab displays the following information:
Description Column
The system name. System
The disk name in node:slot:port format. Name
The manufacturer of the disk. Manufacturer
The model and/or part number of the disk. Model/Part Number
The disk's serial number. Serial Number
The disk's firmware version. Firmware Version
The type of physical disk; Fibre Channel (FC), Solid State (SSD), or Nearline (NL). Device Type
Speed of the specified disk. Device RPM
NOTE: The Device RPM number does not represent a rotational speed for the drives without spinning media (SSD).
It is meant as a rough estimation of the performance difference between the drive and the other drives in the system.
For FC and NL drives, the number corresponds to both a performance measure and actual rotational speed. For an
SSD drive, the number is to be treated as relative performance benchmark that takes into account in I/O per second,
bandwidth, and the access time.
The total capacity of the disk, in GiB. Total Capacity
Viewing the Cage Subsystems Power Supplies Tab
The Cage Subsystems Power Supplies tab displays information about the system's power supplies.
To access the Cage Subsystems Power Supplies tab, click the Power Supplies tab after accessing
the Cage Subsystem tab.
320 Viewing the Cage Subsystems Tab