HP 3PAR Operating System Software - Manual (Page 111)

Description Field Group
The alert sequence. Sequence
The controller node ID. Node ID Resolved by Event (if
resolved)
The component for which the alert was issued. Component
The alert severity. See “Alert Severity Indicators” (page 40)
.
Severity
The alert type. Type
The alert sequence. Sequence
The time the alert was resolved. Time
A brief description of the alert. Message
The name of the server that generated the alert. System Component
The system's serial number. System SN
The node ID. Node ID
The affected system components. Component
The number of times the alert was issued. Repeat Count Frequency
The last occurrence of the alert. Last time
The first occurrence of the alert. First time
Configuring Ports
The InForm Management Console allows you to configure the following types of ports:
•
CNA
•
Fibre Channel
•
iSCSI
•
Remote Copy over Fiber Channel (RCFC)
•
Remote Copy over IP (RCIP)
To learn how to configure ports with the InForm Management Console, see the following:
“Configuring CNA Ports” (page 111)
“Configuring Fibre Channel Ports” (page 112)
“Configuring iSCSI Ports” (page 112)
“Configuring a Remote Copy over Fibre Channel Port” (page 113)
“Configuring a Remote Copy over IP Port” (page 113)
Configuring CNA Ports
To Configure CNA port:
1.
In the Manager Pane, click Systems.
2. Open the System tree and select Ports.
3. In the Ports Summary tab, right click the CNA port you wish to configure.
4. Click the Configure option.
The iSCSI Port Configuration wizard appears.
Configuring Ports 111