HP 3PAR Operating System Software - Manual (Page 316)

69 Viewing the Cage Subsystems Tab
The Hardware Inventory Cage Subsystems tab provides information about system drive cage
components. The information is included on six additional tabs, which are discussed in the following
sections:
“Viewing the Cage Subsystems Drive Cages Tab” (page 316)
“Viewing the Cage Subsystems Interface Cards Tab” (page 317)
“Viewing the Cage Subsystems SFPs Tab” (page 317)
“Viewing the Cage Subsystems Magazines Tab” (page 318)
“Viewing the Cage Subsystems Physical Disks Tab” (page 319)
“Viewing the Cage Subsystems Power Supplies Tab” (page 320)
To access the Hardware Inventory Cage Subsystems tab:
1.
Click Hardware Inventory in the “Manager Pane” (page 18) .
2. In the “Management Tree” (page 17) , select the InServs node, or select a specific system
node (for example, s424).
3. In the “Management Window” (page 24) , click the Cage Subsystems tab.
NOTE: In the following sections, each subsystem tab has been accessed from the InServs node
(all connected storage server) level on the Management Tree. The resulting depicted screen output
display data for all connected systems.
Viewing the Cage Subsystems Drive Cages Tab
The Cage Subsystems Drive Cages tab displays information about the system's drive cages.
To access the Cage Subsystems Drive Cages tab, click the Drive Cages tab after accessing the
Cage Subsystem tab.
NOTE: In the screen output above, the Drive Cages tab has been accessed from the InServs
node (all connected storage server) level on the Management Tree. If the Drive Cages tab was
accessed from the Management Tree via a specific server node (for example, s424), the resulting
information displayed on the Drive Cages tab does not display the System column.
The Cage Subsystems Drive Cages tab displays the following information:
Description Column
The system name. System
The drive cage name. Name
The manufacturer of the drive cage. Manufacturer
316 Viewing the Cage Subsystems Tab