Ag Leader GeoSteer Operation Manual - Manual (Page 22)

GeoSteer System Installation Overview
8 GeoSteer System
GeoDock Pro
The GeoDock Pro is the roof mounted piece of the GeoSteer system that contains the GPS Antenna and Cell Modem antenna.
The GeoDock Pro houses the optional GS-900 or GS-450 Radio Modems or the GS-OmniSTAR Demodulator when they are
installed.
Figure 1-6 GeoDock Pro
GeoDock Pro – No Cell
This version of GeoDock is the same as the GeoDock Pro except the assembly does not have a Cell Modem Antenna or coax
connector installed on it. This version is ordered with kits that do not come with a Cell Modem.
Figure 1-7 GeoDock Pro - No Cell
3
Vehicle Installation Kits
The GeoSteer system is designed to be compatible with many makes and models of vehicles available in today’s agricultural
market. GeoSteer is brand neutral and can be installed on any manufacturer’s vehicle including AGCO, Ag Chem, Case,
Challenger, Fendt, John Deere, New Holland, Massey Ferguson, and many others. The GeoSteer system is also capable of
being installed on a variety of platforms including articulated tractors, combines, MFWD and standard front axle tractors,
floaters, sprayers, swathers, track tractors, and others. The same user interface can be used on all vehicles, regardless of the
make or model, making it easy for drivers to become familiar with the controls even if the system is installed on multiple
vehicle types.
To make installations simple and reliable, many vehicle-specific installation kits have been designed to fit on each individual
make and model. These kits are available for vehicles that come from the factory with a factory installed steering system (ex.
Steer Ready, CAN Bus, or ISO Ready) as well as options for those vehicles that need a complete steering kit installed. Even if
there is not a vehicle-specific kit available for the vehicle, properly trained installers can often use a custom installation kit to