Ag Leader ParaDyme Radio Option Kits Hardware Installation Guide - Manual (Page 49)

Hardware Installation Guide 43
ParaDyme Smart Antenna Bottom Cover Installation Procedure
11. Tighten the screws to 20 in-lb (2.3 Newton meters) with a #2 Phillips driver following the numbered sequence (1-13)
shown in Figure 4-47.
Figure 4-47 ParaDyme Receiver Bottom Cover Installation
12. Repeat the torque pattern to ensure all screws are properly secured.
13. Go to the Antenna Installation Procedure on page 44.
1
3
7
5
9
12
4
10
11 13
2
8
6