Ag-Bag MB7010HyPac - Manual (Page 104)

12
S
ERVICE AND
M
AINTENANCE
STOP MACHINE AND TURN OFF ENGINE TO ADJUST
,
LUBRICATE
,
OR SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 7
Only trained Dealer
should make this adjust-
ment. Head Roller
should never need ad-
justing.
Feed Table Adjustment (cont.)
Adjust Feed Table Belt
1. Adjustment Bolt
2. Adjustment Lock Nut
To adjust belt:
- Tighten adjustment bolt to push
belt away for the side you have
tightened.
- Loosen the bolt to bring belt to
the side you have loosened.
Do not over tighten belt, this
may result in premature wear
of bearings.
Feed Table Head Roller
1. Head Roller Adjustment Bolt
2. Head Roller Adjustment Lock
nut
1 2
1 2