Ag-Bag MB7010HyPac - Manual (Page 2)

1 Ag-Bag International, Ltd.
G6000 April 2003
Section 0
USING THE MANUAL.
This manual has been designed to be used with the G6000 Ag-Bagger ® . Read this manual carefully to
learn how to operate and service your Ag-Bagger ® correctly. Failure to do so could result in personal
injury or equipment damage.
This manual should be considered a permanent part of your Ag-Bagger ® and should remain with the
machine when you sell or trade it.
For ease of use this manual is divided into the following sections. Each section has its own Table of
Contents and Index. To access each section simply click on the blue high lighted words or
numbers. When in a particular section simply click on the blue page numbers to jump to that
page. The Table of Contents and Index both have these high lighted numbers
Section 0: This section contains information general in nature, Ag-Bag ® policy, Warranty and whom to
contact.
Section 1: Safety. This section presents safety information for use with the Ag-Bagger ® . General
information as well as specific safety guidelines is detailed here. Labels used on the Ag-Bagger® and
general safety warnings are also shown.
Section 2: Machine Overview. The machine overview section shows and identifies the location of
many of the commonly used features of the Ag-Bagger
®
Section 3: Features and Controls. Pictures depicting the many features and controls with a short
description of what each does are shown in this section.
Section 4: Set-up and Operating Procedures. This section gives you and your employee’s general
information on the setup and operation of your Ag-Bagger
® .
Section 5: Bagging and the Terrain. This section deals with placing the bag and preparing the site for
best result. Also covered is keep the correct tension on the cables for best compactions.
Section 6: Trouble Shooting. This section is not intended to address all the possible problems that
might arise during bagging. It is intended to review some of the common problems that might arise
during the bagging operation.
Section 7: Service and Maintenance. The information provided in this section is given for general
information only. It is to help you to service and maintain the Ag-Bagger
® .
Appendix A: Parts. The parts manual for your Ag-Bagger ® are contained in this section.
Appendix B: The 3M’s of Silage. A more technical look at bagging is presented in this section.
Appendix C: Bagging Instructions. A more detailed look and discussion of the bagging operation.
IT IS YOUR RESPONSIBILITY TO READ ALL SECTIONS OF THIS MANUAL BEFORE
OPERATING YOUR AG-BAGGER ® !