Ag-Bag MB7010HyPac User Manual
Page 12
S
AFETY
10
STOP
MACHINE
AND
TURN
OFF
ENGINE
TO
ADJUST
,
LUBRICATE
,
OR
SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 1
•
Never use your hands to locate a hydraulic leak on attachments. Use a small piece of card-
board or wood. Hydraulic fluid escaping under pressure can penetrate the skin.
•
When disconnecting hydraulic lines. Shut off hydraulic supply and relieve all hydraulic pres-
sure.
•
Openings in the skin and minor cuts are susceptible to infection from hydraulic fluid. If injured
by escaping hydraulic fluid, see a doctor at once. Gangrene can result. Without immediate
medical treatment, serious infection and reactions can occur.
•
Replace all shields and guards after servicing and before moving.
•
After servicing, be sure all tools, parts and service equipment are removed.
•
Do not allow grease or oil to build up on any step or platform.
•
Never replace hex bolts with less than grade five bolts unless otherwise specified. Refer to bolt
torque chart for head identification marking.
•
Where replacement parts are necessary for periodic maintenance and servicing, genuine fac-
tory replacement parts must be used to restore your equipment to original specifications. Ag-Bag
International will not claim responsibility for use of unapproved parts and/or accessories and other
damages as a result of their use.
•
If equipment has been altered in any way from original design, Ag-Bag International, Ltd. does
not accept any liability for injury or warranty.
•
A fire extinguisher and first aid kit should be kept readily accessible while performing mainte-
nance on this equipment.