Ag-Bag MB7010HyPac - Manual (Page 55)

S
ETUP AND
O
PERATING
P
ROCEDURES
5
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 4
P
INTLE
H
ITCH
The Pintle Hitch is designed for
towing the Ag-Bagger
® on the
open road. It is recommended
that you know and follow all lo-
cal laws dealing with moving
farm equipment in your area.
Remember the Maximum
Towing Speed on your Ag-
Bagger
® is 25MPH.
There are three main pieces to
the hitch, (1) brace, (2) hitch, and
(3) lock pin with hair pin.
To install (ref B) remove pin 3 and
pull out hitch 2. After moving the
hitch a short distance place the
pin back into the hole, as you pull
out the hitch it will drop into a
second hole allowing you to lock
it into place.
Remove the brace (ref C) by pull-
ing the pins (3) from each end
and remove from holders on the
Ag-Bagger
® . Using the handle on
the brace position it into the
notches on the frame and hitch.
Complete the installation by in-
serting the pins (3), removed
from the brace storage area, into
the holes provided making sure
to use the hair pins to lock it into
place.
1
2
A
1 3 3
C
3
2
B