Ag-Bag MB7010HyPac - Manual (Page 43)

F
EATURES AND
C
ONTROLS
12 Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 3
Feed Table Wheel
Fitted with replaceable cleats (a)
and packable wheel bearings (b),
the feed table wheel is designed
to roll across hard or soft sur-
faces.
Standard
Hydraulic Lift Jack Con-
trols - External
Located on either end of the Ag-
Bagger
® these controls operate
the lift jacks. Switches 14 & 15
on the Arm Rest Console
operate the jacks from inside
the cab.
Standard
Warning Devices
Located on the cab and engine
cowling are two lights which are
red over green, also on the en-
gine cowling are air horns. These
devices are used to help in the
bagging operation as warning
and start and stop notifications.
Standard
a
b
Engine End Control Cab End Control
Engine End Cab End