Ag-Bag MB7010HyPac - Manual (Page 7)

S
AFETY
5
STOP MACHINE AND TURN OFF ENGINE TO ADJUST
,
LUBRICATE
,
OR SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 1
SAFETY SIGN CARE:
Keep safety signs clean and legible at all times.
• Replace safety signs that are missing or have become illegible
• Replaced parts that displayed a safety sign should also display the current sign.
• Safety signs are available from your authorized Ag-Bag ® Dealer or Ag-Bag Interna-
tional, Ltd.
HOW TO INSTALL SAFETY SIGNS:
• Be sure that the installation area is clean and dry.
• Decide on the exact position before you remove the backing paper.
• Remove the smallest portion of the split backing paper.
• Align the decal over the specified area and carefully press the small portion with the
exposed sticky backing in place.
• Slowly peel back the remaining paper and carefully smooth the remaining portion of
the decal in place.
• Small air pockets can be pierced with a pin and smoothed out using the piece of decal
backing paper.
TIRE SAFETY:
• Failure to follow proper procedures when mounting a tire on a wheel or rim can pro-
duce an explosion which may result in serious injury or death.
• Do not attempt to mount a tire unless you have the proper equipment and experience
to do the job.
• Inflating or servicing tires can be dangerous. Whenever possible, trained personnel
should be called to service and/or mount tires.
• Always order and install tires and wheels with appropriate capacity to meet or exceed
the anticipated weight to be placed on the equipment.