Wiring instructions; #684 with out controls – Flex-a-Lite 684 - without controls Black Magic TOYOTA 4x4 (1984-1996 4 & 6 cyl.) User Manual

Page 3

Advertising
background image

The Flex-a-lite Limited Warranty
Flex-a-lite Consolidated, 7213-45th St. Ct. E., Fife, WA 98424, Telephone No. 253-922-2700, warrants to the original purchasing user, that all Flex-a-lite products to be free of defects in material and
workmanship for a period of 365 days (1 year) from date of purchase. Flex-a-lite products failing within 365 days (1 year) from date of purchase may be returned to the factory through the point of
purchase, transportation charges prepaid. If, on inspection, cause of failure is determined to be defective material or workmanship and not by misuse, accidental or improper installation, Flex-a-lite will
replace the fan free of charge, transportation prepaid. Flex-a-lite will not be liable for incidental, progressive or consequential damages. Some states do not allow the exclusion or limitaion of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights, which vary from state to state.
The Flex-a-lite warranty is in compliance with the Magnuson-Moss Warranty Act of 1975.

Rev. 02-09-10 99674 Page 3 of 3

WIRING INSTRUCTIONS; #684 with out controls

1. Wire the fan motor to power source (control unit or switch and relay if desired). Connect the

Blue wire from

the fan motor to a 12v. positive (+) source. Connect the

Black motor wire to a ground (-) source.

NOTE: Failure to do this will result in incorrect operation and damage to the fan motor!

2. Connect an inline fuse holder; Be shure to connect a fuse holder in-line with the positive (+) power wire to

protect the fan motor and your vehicle's electrical system from damage.

Advertising
This manual is related to the following products: