Flex-a-Lite 294 Monster Fan - Manual (Page 4)

WIRING INSTRUCTIONS; #293 with out controls
1. Wire the fan motors to power source (control unit or switchand relay if desired). Connect the Blue
wire from the fan motors to a 12v. positive (+) source. Connect the Black motor wires to a ground
(-) source.
NOTE: Failure to do this will result in incorrect operation and damage to the fan motors!
2. Connect an inline fuse holder; Be sure to connect a fuse holder in-line with the positive (+)
power wire to protect the fan motors and your vehicle’s electrical system from damage.
4