Innovate Motorsports LMA-3 - Manual (Page 12)

- 12 -
5 Setting up the input channels
The LMA-3 can be programmed directly through the setup buttons on the LMA-3. LM
Programmer software version 3.05 (or later) allows you to program the LMA-3 via the LM
Programmer software. This is necessary for some of the more advanced functionality of the LMA-
3. Some of these advanced functions like speed sensing, frequency sensing, custom RPM, and
so on require more user input data that cannot be supplied by the simple 3-button interface of the
LMA-3.
5.1 Programming the LMA-3 with the setup buttons
To program an input channel, repeatedly press the ‘Channel’ button until the channel number to
program appears on the LMA-3 digit display. Then repeatedly press the ‘Function’ button until
the digit display shows the intended function. The digit display will switch rapidly between
indicating the input channel number and the set function. The LEDs next to the channel and
function buttons will indicate which value is being displayed.
If the function selected is External input, the digit display shows a ‘=’ sign like this:
Refer to Chapter 1 for the different functions for the inputs.