Innovate Motorsports LMA-3 - Manual (Page 24)

- 24 -
11.2 Updating the firmware
Click on the ‘Update Firmware’ button. You will be presented with a file dialog box that allows you
to select a firmware file. Firmware files end with the file extension .dld.
LMA-3 firmware file names start with: AUXB1 for AuxBox 1. The first part is followed by a dash,
then a V, then the version number without dots.
Example: LMA-3 firmware version 1.00 alpha release would have the file name AUXB1-
V100A.dld LAM-3 firmware version 1.00 would have the file name AUXB1-V100.dld
After you opened the firmware file, this new firmware will be downloaded in the LMA-3 device.
11.3 Input 1 Configuration
Click on the Input 1 tab in the top of the window.
11.3.1 Measuring RPM
The drop-down list at the top of the window allows you to select the different functionality for that
input. If RPM is selected, the area below the functionality selection shows as above.
Select the cylinder count in the appropriate drop-down list.