Innovate Motorsports OT-1 User Manual
Page 13
- 13 -
The Inputs Tab allows you to assign the generated MTS channels to a particular OBD-II value:
In order to do this, the OT-1 must be connected to the ECU in the vehicle (vehicle light on and
blinking). If it is not, you will be warned and the current input assignments will be displayed but
you will not be able to edit them. If this happens, you can turn on the vehicle, wait for the vehicle
light, leave the Inputs tab, and return to it.
Only the number of channels selected on the Protocol/Channels page can be edited. The
available values for logging on the connected ECU are listed in the drop list for each Input. Some
vehicles will support larger lists than others. Also, it cannot be stressed enough that different
ECUs will have dramatically different response speeds. Here are two extreme examples. The
first is a log trace of one channel (RPM) from a 2001 Lexus: