Sper Scientific 850046K AquaShock DO Kit - Manual (Page 10)

11
4. Press ↑ to increase the value by 1.
Hold down ↑ to continually increase the value.
Press ↓ to decrease the value by 1.
Hold down ↓ to continually decrease the value.
Press SETUP to save and the meter automatically
moves to the month setting (see Fig. C.).
5. Repeat step 4 to adjust the month, day, hour, and minute
(see Fig. D, E & F).
6. Press EXIT to return to Normal Mode without saving.
Note...
This procedure adjusts the meter’s internal clock which is a 24
hour format only. The internal clock will function when the meter is
turned off if the battery is installed.
Fig. A
Fig. D
Fig. B
Fig. E
Fig. C
Fig. F