Sper Scientific 850046K AquaShock DO Kit - Manual (Page 15)

15
Set RH Parameters
1. Press SETUP to enter the Setup mode.
2. Press ↑ or ↓ to display the Set RH screen (see Fig. A)
3. Press SETUP to enter the Set RH screen (see Fig. B).
The current set value will flash.
4. Press ↑ to increase the RH Value.
Hold down ↑ to continually increase the value.
Press ↓ to reduce the RH Value.
Hold down ↓ to continually reduce the value.
RH Value range may be set from 0~100%.
5. Press SETUP to save the change and return to Normal Mode.
6. Press EXIT to return to Normal Mode without saving change.
Fig. E
Fig. A Fig. B