Sper Scientific 850046K AquaShock DO Kit - Manual (Page 11)

11
Restore Factory Settings
1. Press SETUP to enter the Setup Mode.
2. Press ↑ or ↓ to select the Restore Factory Settings screen
(see Fig. A).
3. Press SETUP to confirm selection. “NO” will flash on the LCD.
(see Fig. B).
4. Press ↑ or ↓ to select “YES” or “NO”. (see Fig. C).
5. When “YES” is displayed, press SETUP to confirm and all
parameters will restore to factory settings (except the clock)
and the meter returns to Normal Mode.
6. Press EXIT to return to Normal Mode without saving.
Fig. A Fig. B
Fig. C
Factory Defaults
Parameter Name Parameter Value
Date
2011-1-1 0:0
CAL Standard
CAL Point
Offset
Temperature
77.0°F (25.0°C)
Temperature Unit °F
Bar. Unit
mmHg
Bar. Value 760
% Offset Value 0.0ppt
mg/L (ppm) 0
% saturation 0
RH 100%
Memory