Sper Scientific 850046K AquaShock DO Kit User Manual
Page 17
Advertising
17
Set % Offset
1. Press
RANGE to select % measuring scale.
2. Press
SETUP to enter the Setup Mode.
3. Press ↑ or ↓ to display Set % Offset screen (see Fig. A).
4. Press
SETUP to enter the Set % Offset mode.
The current value will flash (see Fig. B).
5. Press ↑ to increase the % Offset Value.
Hold down ↑ to continually increase the value.
Press ↓ to reduce the % Offset Value.
Hold down ↓ to continually reduce the value.
The % Offset range is ±10.0. It cannot exceed 0.0 ~199.9%.
6. Press
SETUP to save the changes and return to Normal Mode.
Press
EXIT to return Normal Mode without saving changes.
Fig. A
Fig. B
Advertising