ARI Armaturen ARImetec-S EN - Manual (Page 13)

Rev. 0040807015 1014 Page 2-13
Operating Instructions
ARImetec
®
-S
6.5.4 "Max" functions
6.5.5 "Hold" functions
6.6 Main menu
6.6.1 Menu structure
Button F1 activates the "Max" function.
The numerical value that appears on the display
corresponds to the maximum ultrasonic level, while
the intensity scale shows the current level. The
button name is highlighted to indicate that the "Max"
function is active:
1: Maximum ultrasonic level
2: Current ultrasonic level
By pressing the control knob, you store the
currently displayed value, i.e. the maximum
value, in the active single test. By pressing button
"F1" again, you cancel the "Max" function.
Button F2 activates the "Hold" function. This
function can be used to record ultrasonic levels. It is
useful, for example, if the display is not visible when
the test is carried out. By pressing button "F2", you
store the ultrasonic level that is measured at that
instant on the display.
By pressing the control knob, you store the
currently displayed value, i.e. the "Hold" value, in
the active single test.
By pressing button "F2" again, you cancel the
"Hold" function.
Data logger (1)
Test parameters (2)
Options (3)
Single test (1)
Long-time test (2)
Averaging time (1)
Tester (2)
Mixer frequency (3)
Mode (4)
Date / time (1)
Auto-Power-Off (2)
Auto-Light-Off (3)
Contrast (4)
Data logger Options
Test parameters