0 notes on possible dangers, 1 meanings of the symbols used, 2 explanatory notes on safety information – ARI Armaturen ARImetec-S EN User Manual

Page 3: 0 storage and transport, 0 storage and transport -3

Advertising
background image

Rev. 0040807015 1014

Page 2-3

Operating Instructions

ARImetec

®

-S

1.0 General information about these Operating Instructions

These Operating Instructions provide information on handling and maintaining the device.
Please contact the supplier or the manufacturer in case of problems which cannot be
solved by reference to the Operating Instructions.
They are binding for transport, storage, installation, start-up, operation, maintenance and
repair.
The notes and warnings must be observed and adhered to at all times.
- Handling and all work must be carried out by expert personnel or all activities supervised

and checked by a suitably trained person.

The manufacturer reserves the right to introduce technical modifications at any time.
These Operating Instructions comply with the requirements of the relevant EU Directives.

2.0 Notes on possible dangers

2.1 Meanings of the symbols used

2.2 Explanatory notes on safety information

Dangers, risks and safety information are highlighted in these Operating and Installation
Instructions to attract the reader's attention.
Information marked with the above symbol and “ATTENTION !” describes behaviour or
procedures which – if ignored – can result in serious or fatal injury to users or third parties
or in material damage to the system or the environment. The behaviour and procedures
referred to must be complied with and suitable measures implemented to monitor such
compliance.
All other information not specifically emphasised, such as transport, installation, operating
and maintenance instructions as well as technical data (in these Operating Instructions, in
the product documentation or on the device itself) must likewise be complied with in order
to avoid faults which could directly or indirectly cause serious injury to persons or damage
to property.

3.0 Storage and transport

- Store the device in a dry, dirt-free location (temperature range: -10°C to +60°C).
- Do not remove the device from the carrying case unless absolutely necessary.
- Protect against external shocks (impact, vibration, etc.).
- Do not soil or damage the rating plate.

NOTE !
. . .

Important or useful information.

ATTENTION !
. . .

Warning regarding a general danger.

ATTENTION !
. . .

Warning regarding dangerous voltage.

i

Advertising