ARI Armaturen ARImetec-S EN - Manual (Page 24)

Page 2-24 Rev. 0040807015 1014
Operating Instructions
ARImetec
®
-S
6.10.3 Installing SONAPHONE Communicator
The installer for the "SONAPHONE Communicator" PC software is launched automatically
when you insert the installation CD. If not, please launch it manually by double clicking
"setup.exe" on the installation CD. Then follow the instructions provided on your PC screen.
Step 2: Insert the driver CD
When you insert the
SONAPHONE Communicator
installation CD, the installation
should continue automatically
after a few seconds. If not, click
"Next >".
All the drivers required to operate the ARImetec
®
-S are contained in the following directory:
"CD drive:\Driver\". If they are not found automatically (as described in step 2), you can select the
appropriate drivers manually from the CD by choosing "Install from a list or specific location".
Step 3: Windows Logo testing
Click "Continue anyway" to install
all the required drivers on the PC.
After installing the drivers
successfully, you see a new
window in which you should click
"Finish" to complete the
installation.