ARI Armaturen ARImetec-S EN - Manual (Page 15)

Rev. 0040807015 1014 Page 2-15
Operating Instructions
ARImetec
®
-S
6.7.2.1 Creating a new long-time test
By pressing button "F2", you open a screen in which you can create a new long-time test:
You specify the test parameters in the "Parameters" menu, which is opened by pressing
button "F1". To change the display settings for the long-time test or stop the test, you must
open the "Setup" menu by pressing button "F3":
1: Ultrasonic level
2: Test time
3: Temperature
4: Scale for the ultrasonic level
5: Scale for the measured temperature value