Videoswitch Vi605 - Manual (Page 12)

Digital Recorder
8
1.7 Recording
The ViX05 Digital Recorder should now be fully operational and recording images from all
cameras. The default image retention period is 31 days unless set otherwise in the menu.
1.8 Routine Checks
If the ViX05 is not recording, the message
RECORDING STOPPED will be displayed on
the video monitor. This should only happen if there is no video, if no hard drive is fitted or if it
is faulty, or if record timers have been set to disable recording.
Although the system is intended for continuous un-attended operation, it is recommended
that the user regularly check that images from all cameras replay correctly. Any
potential problems with the cameras or recording system will then be detected as soon a
possible, rather than continuing un-noticed until a critical incident needs to be recalled from
the system.
Similarly, when a CD has been created you should check that it plays back correctly,
before the images on the hard drive in the ViX05 become over-written. The CD may be
checked by either by playing it on the ViX05 or on a PC.
1.9 Care of the Hard Drive(s)
A hard drive is a delicate mechanical item that should be handled with care. Before moving
a ViX05 that has been powered up, or removing a hard drive, remove power and wait for 30
seconds for the drive to stop spinning. This is a precaution to avoid possible damage to
the hard drive.