Videoswitch Vi605 - Manual (Page 47)

Digital Recorder
43
MPEG4 Port
This is the port number of an asscociated Vi-MPEG4 option module. Normally is would be
80, but if multiple systems are connected via a router and sharing a IP address, it will be
necessary to set different port numbers for, each MPEG4 module and to enter the
corresponding port number here.
[0..9] Enter port
[<][>] Move cursor
[^][v] Change digit at cursor
[TAG] Set default port
Sub-Net Mask
[0..9] Enter Sub-Net Mask
[<][>] Move cursor
[^][v] Change digit at cursor
[TAG] Set default Sub-Net Mask
Gateway
[0..9] Enter Gateway
[<][>] Move cursor
[^][v] Change digit at cursor
[TAG] Set default Gateway
Central Station
This DVR may be setup to make an IP call to a alarm central station when an alarm or
critical alert occurs.
IP Address
Set the IP address of the PC running the alarm monitoring software:
[0..9] Enter IP address
[<][>] Move cursor
[^][v] Change digit at cursor
[TAG] Set default IP address
Port
Set the port you wish to use for the alarm monitoring software:
[0..9] Enter port
[<][>] Move cursor
[^][v] Change digit at cursor
[TAG] Set default port
Call Triggers
The following options determine under what conditions a call is sent: