Digital recorder – Videoswitch Vi605 User Manual

Page 32

Advertising
background image

Digital Recorder

28

Weekend Daytime

Highlight each hour that is to be considered as daytime during weekends.

Use the [TAG] key to toggle all hour blocks on and off.

Non-Alarm Record Rates

These menu settings apply when no alarm or activity event is in progress.

Day

The non-alarm daytime record rate for each camera is set here.

If the requested rates cannot be achieved, the DVR will scale down all rates such that they
can be achieved. The actual rate are displayed in square brackets [].

Note that cameras with activity detection enabled are given a rate of at least 1 picture per
second (pps)and those with remote access in progress, a rate of at least 3 pps.

[<][>] Move cursor to each camera

[^][v] Change rate by whole numbers

[+][-] Change rate by fractional amount

[TAG] Default rate to zero (Off) or maximum

[OK] Copy rate of this camera to all others

Night

The non-alarm night-time record rate for each camera is set here.

If the requested rates cannot be achieved, the DVR will scale down all rates such that they
can be achieved. The actual rate are displayed in square brackets [].

Note that cameras with activity detection enabled are given a rate of at least 1 picture per
second (pps)and those with remote access in progress, a rate of at least 3 pps.

[<][>] Move cursor to each camera

[^][v] Change rate by whole numbers

[+][-] Change rate by fractional amount

[TAG] Default rate to zero (Off) or maximum

[OK] Copy rate of this camera to all others

Alarm Record Rates

These menu settings apply when an alarm or activity event is in progress.

Day

The alarm daytime record rate for each camera is set here.

Note that these setting only apply to those particular cameras with alarm status. The
requested rates for other cameras will be as per the non-alarm settings.

If the requested rates cannot be achieved, the DVR will scale down all rates such that they
can be achieved. The actual rate are displayed in square brackets [].

Note that cameras with activity detection enabled are given a rate of at least 1 picture per
second (pps)and those with remote access in progress, a rate of at least 3 pps.

[<][>] Move cursor to each camera

[Inc][Dec] Change rate by 5pps steps

[^][v] Change rate by whole numbers

Advertising
This manual is related to the following products: