Videoswitch Vi605 - Manual (Page 9)

Digital Recorder
5
1.4 Connecting up the Vi405
For a standard digital recording system you will need
The Vi405 recorder
Some cameras with lenses
A video monitor (with BNC composite video input)
BNC cables
ALARM INPUTS
RELAYS/DOMES
CAM 2 CAM 2 CAM 2 CAM 2 CAM 2 CAM 2 CAM 2 CAM 2
CAM 2 CAM 2 CAM 2 CAM 2 CAM 2 CAM 2 CAM 2 CAM 2
PC KBD
PSTN/ISDN
AC POWER INPUT
www.videoswitch.co.uk
15 13 11 9 7 5 3 1 S1
16 14 12 10 8 6 4 2 S2
Digital Video Recorder
ETHERNET
GPS
S-VIDEO
M
S1
S2
S3
MONITORS EXPANSION TO NEXT DVR
MAIN SPOT1 SPOT2 SPOT3
KEYBOARDS
LINE OUT LINE IN
MIC
AUDIO
CAMERAS
TILLS/PIRS
Connect the monitor output (MAIN) of the Vi405 to a Video Monitor using a BNC cable
Make sure that the monitor termination is switched on (i.e. to 75 Ohms)
Connect a camera to Camera Input 1 on the Vi405 using a BNC cable
Connect further cameras to Inputs 2,3,4 etc
Make sure that the voltage select switch is set to suit the mains supply. The setting
required in UK and Europe is normally 230Vac.
Connect the mains power using the mains cable provided