Digital recorder – Videoswitch Vi605 User Manual
Page 36
Digital Recorder
32
[<][>] Move cursor
[^][v] Scroll selected digit
[TAG] Set the default dwell time
[OK] Copy this dwell time to all cameras
Multi-Unit Sequencing
If you have enable multi-unit sequencing, the cameras to be sequenced on each unit should
be set here.
Camera List
Select each unit in turn and specify which cameras are to be included in multi-unit
sequencing.
[<][>] Move cursor to select camera
[^][v] Include/Exclude camera
[MON] Exit this level
A solid block indicates that a camera is included, a dash indicates that it is excluded.
Dwell Time
When multi-unit sequencing is selected, a common dwell time is used for all cameras.
[0..9] Enter a dwell time in seconds
[TAG] Set the default dwell time
PIP Mode
Spot Monitor Options
The spot monitor may be setup to automatically change camera or to change to auto-
sequencing at different times of day.
Weekday Spot Daytime
Set the blocks on to indicate daytime hours during weekdays.
[<][>] Select hour of day
[^][v] Turn block on or off
Weekend Spot Daytime
Set the blocks on to indicate daytime hours during weekends.
[<][>] Select hour of day
[^][v] Turn block on or off
Day Spot Camera
This is the camera number that the spot monitor will display when the Spot Daytime starts,
or if the unit powers up in the daytime.
[^][v] Select camera
[<] Exit this level