Videoswitch Vi605 - Manual (Page 7)

Digital Recorder
3
1.2 Connecting Up the Vi205
For a standard digital recording system you will need
The Vi205 recorder
Some cameras with lenses
A video monitor (with BNC composite video input).
BNC cables
Connect the monitor output (MAIN) of the Vi205 to a Video Monitor using a BNC cable
Make sure that the monitor termination is switched on (i.e. to 75 Ohms)
Connect a camera to Camera Input 1 on the Vi205 using a BNC cable
Connect further cameras to Inputs 2,3,4 etc
Make sure that the voltage select switch is set to suit the mains supply. The setting
required in UK and Europe is normally 230Vac.
Connect the mains power using the mains cable provided