Videoswitch Vi605 - Manual (Page 52)

Digital Recorder
48
User3
User 3 can be any category of user that you wish, for example a manager.
User 3 Password
Specify here a numeric password for USER3.
[0..9] Enter password
[<][>] Move cursor
[^][v] Change digit
[TAG] Set default password
User 3 Access Rights
Specify here what access right you wish to be available to users who log on with the USER3
password.
[<][>] Move cursor to each type of access
[^][v] Set whether USER1 has access
[TAG] Set default
User4
User 3 can be any category of user that you wish, for example the installer.
User 4 Password
Specify here a numeric password for USER4.
[0..9] Enter password
[<][>] Move cursor
[^][v] Change digit
[TAG] Set default password
User 4 Access Rights
Specify here what access right you wish to be available to users who log on with the USER4
password.
[<][>] Move cursor to each type of access
[^][v] Set whether USER1 has access
[TAG] Set default
Camera Inputs
The following options affect the camera inputs:
Brightness
It is important that the cameras are set up correctly to produce standard levels of video out.
However, if there is some loss due to long cable runs, this setting can provide
compensation. This setting does not affect the spot monitor outputs.
If the cable runs are such that the loss is too great, launch amplifiers at the affected
cameras end may be required.
Colour Boost
It is important that the cameras are set up correctly to produce standard levels of video out.