Kenwood DNX4230TR - Manual (Page 14)

26 26 27
Return to the Top page
DVD, VCD
Return to the Top page
DVD, VCD
Multi function menu
DVD VCD
The functions of each key are as follows.
[ 4] [¢]
Searches the previous/next content.
[
38]
Plays or pauses.
[
] or [ ] (DVD only)
Plays in slow motion forward or backward.
[
7]
Stops playback. When touched twice, the disc is played from the beginning when you play it the next
time.
[PBC] (VCD only)
Turn Playback control (PBC) on or off.
[
SETUP]
Touch to display the SETUP Menu screen. See Setting Up (P.76) .
[ AUDIO]
Touch to display the Audio Control screen. See Controlling Audio (P.90) .
[ REAR ]
Touch to mute the rear speaker.
DVD Disc Menu Operation
You can set up some items in the DVD-VIDEO
disc menu.
1
Touch illustrated area during playback.
Menu Control screen appears.
2
Perform desired operation as follows.
Displays the top menu
Touch [Top].*
Displays the menu
Touch [Menu].*
Displays the previous menu
Touch [Return].*
Enters selected item
Touch [Enter].
Enables direct operation
Touch [Highlight] to enter the highlight control
mode
(P.27) .
Moves the cursor
Touch [
5], [∞], [2], [3].
* These keys may not function depending on
the disc.
Highlight control
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.
1
Touch [Highlight] in the Menu Control
screen.
2
Touch desired item on the screen.
NOTE
• The highlight control is cleared automatically if
you do not operate for a constant time.