Tuner setup, Digital radio setup, Tuner setup digital radio setup – Kenwood DNX4230TR User Manual
Page 31
60
60
61
Tuner Setup
You can set tuner related parameters.
1
Touch [
] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.
5
Set each item as follows.
NEWS
Sets a news bulletin interrupt time. Default is
“OFF”.
AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON”.
Regional
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “ON”.
Auto TP Seek
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON”.
Language Select
Selects a display language for the PTY function.
Digital Radio Setup
You can set Digital Radio related parameters.
1
Touch [
] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [Digital Radio SETUP] in the list.
Digital Radio SETUP screen appears.
5
Set each item as follows.
Priority
If the same service is provided by Digital
Radio during Radio Data System reception,
automatically switches to Digital Radio. If the
same service is provided by Radio Data System
when reception of the service being provided
by Digital Radio becomes poor, automatically
switches to Radio Data System.
PTY Watch
If the service of the set program type begins
with the ensemble being received, switches
from any source to Digital Radio for service
reception.
Announcement Select
Switches to the set Announcement service. For
details, see
.
Seamless Band
Prevents audio break when switching from
Digital Radio to Analog Radio. Default is “ON”.
Antenna Power*
Sets power supply to the Digital Radio
antenna. Set to “ON” when the Digital Radio
antenna in use is equipped with a booster.
Default is “ON”.
L-Band Tuning*
Sets L-band reception. When set to “ON”, also
receives L-band ensembles.
* This item can be set when in STANDBY
source.