Kenwood DNX4230TR - Manual (Page 33)

64 64 65
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
Using the Bluetooth function, various
functions can be used: listening to the audio
file, making/receiving a call.
About the cell-phone and
Bluetooth audio player
This unit conforms to the following
Bluetooth specifications:
Version
Bluetooth Ver. 2.1+EDR Certified
Profile
Cell-phone:
HFP (Hands Free Profile)
SPP (Serial Port Profile)
PBAP (Phonebook Access Profile)
SSP (Simple Secure Pairing)
Audio player:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
NOTE
• For the cell-phones verified for compatibility,
access the following URL:
http://www.kenwood.com/cs/ce/bt/ .
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.
Registering And Connecting
Bluetooth Unit
It is necessary to register the Bluetooth audio
player or cell-phone to this unit before using
the Bluetooth function.
You can register up to 5 Bluetooth units.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Bluetooth].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Registering the Bluetooth Unit (P.65)
• Connecting the Bluetooth unit (P.65)
B
luetooth Control
Registering the Bluetooth Unit
1
Touch [Search].
Searched Device List screen appears.
NOTE
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See
Connecting the Bluetooth unit
(P.65) .
• The Searched Device List screen cannot be
displayed, when the receiving source is aha or
Bluetooth Audio.
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone
is connected to this unit using Dock Connector
to USB Cable, an authentication dialog appears.
Performing operation for authentication on this
unit or iOS smartphone registers the smartphone
as a Bluetooth device.
2
Touch [PIN Code Set].
PIN Code Set screen appears.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• A Bluetooth device cannot be searched while the
source is aha, or Bluetooth audio.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
3
Enter PIN code and touch [Enter].
The entered code is recognized and
Searched Device List screen appears again.
4
Select the Bluetooth unit to register
from the list.
The Bluetooth SETUP screen appears.
Connecting the Bluetooth unit
1
Touch the device name you want to
connect.
Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
2
Set each profile as follows.
TEL (HFP)
Means that the device is a cell-phone.
Audio (A2DP)
Means that the device is an audio player or
cell-phone with audio player.
Smartphone Link (SPP)
Means that the device is Garmin Smartphone
Link-ready.
ahaRadio (SPP)
Means that the device is Aha-ready.
NOTE
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
• Touching [Remove] of [Device Remove Confirm]
removes registration information. After you touch
the key, a confirmation message appears. Follow
the message and complete the operation.
• To set [Smartphone Link (SPP)] to ON, set
[ahaRadio (SPP)] to OFF.
• To set [ahaRadio (SPP)] to ON, set [Smartphone
Link (SPP)] to OFF.