Memory operation, Selecting operation, Memory operation selecting operation – Kenwood DNX4230TR User Manual
Page 29: List select (p.57), Auto memory (p.56), Selecting operation (p.57)
56
56
57
Memory Operation
Auto memory
You can store stations with good reception in
memory automatically.
This function is for radio only.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
1
Touch [
].
Sub function menu appears.
2
Touch desired band key.
3
Touch [
] in the control screen.
The multi function menu appears.
4
Touch [AME] in the multi function
menu.
5
Touch [
1] or [¡] in the sub function
menu.
Auto memory starts.
Manual memory
You can store the current receiving station in
memory.
1
Select a station you wish to store in
memory.
2
Touch [P#] (#:1-6, 1-15) in which you
want to store the station for 2 seconds
until a beep sounds.
Selecting Operation
Preset select
You can list and select memorized station or
channel.
Selecting from the multi function menu
1
Touch the desired number from P1 to
P6/P15.
The unit will tune to the selected station or
channel.
Selecting from the preset list
2
Touch illustrated area.
List Control screen appears.
3
Select a station or channel from the list.
NOTE
• Touching [
] and then [Preset List] displays
the preset channel list. You can also select your
desired channel from the list.
List select
You can select an ensemble from a list of
memorized ensembles or select a service
from a list of all services received.
1
Touch [
] in the control screen.
The multi function menu appears.
2
Touch [
] in the multi function menu.
The list type screen appears.
3
Touch desired list way.
List screen appears.
4
Select a service from the list.