Usb/sd/ipod/divx setup – Kenwood DNX4230TR User Manual
Page 26
50
50
51
CD, Disc, iPod, USB device, SD card
CD, Disc, iPod, USB device, SD card
iPod setup
1
Set each item as follows.
AudioBook Speed
Sets the audio book playback speed. Select
from [Slow], [Normal] (default), and [Fast].
Wide Screen*
Sets Wide Screen. Set [ON] (default) or [OFF].
On Screen iPod
Sets how to display the information of the
iPod.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
* This setting is not available when an iPod is
connected.
DivX(R) VOD
1
Set each item as follows.
DivX(R) Registration Code
Checks the registration code. This code is
needed when making a disc which has DRM
(Digital Rights Management).
DivX(R) Deactivation
Deregisters the unit which is already registered.
After you touch the key, a confirmation
message appears. Follow the message and
complete the operation.
NOTE
• [DivX(R) VOD] is disabled when a disc is being
played.
• When downloading a DivX VOD file controlled
by DRM, register the code appeared on the
screen. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is
displayed when playing a DivX VOD file with the
viewing restriction. When the used number of
viewing reached maximum number, a warning
message appears and the file cannot be played.
USB/SD/iPod/DivX Setup
You can perform setup when using USB/SD/
iPod/DivX.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see
with the Top Menu Screen (P.19)
.
1
Touch [
] in the control screen.
Multi function menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [USB], [iPod] or [DivX] in the list.
Each setup screen appears.
See the following section for each setting.
•
•
•
USB/SD setup
NOTE
• The screen shot below is for USB device. However,
the setting items of USB and SD setup are quite
the same.
1
Set each item as follows.
Picture Display Time
Selects length of time to display JPEG picture
file in the screen. Select from [Short], [Middle],
and [Long] (default).
On Screen USB/On Screen SD
Sets how to display the information of the USB
device or SD card.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.