Navigate, P.49), Device select (p.48) – Kenwood DNX4230TR User Manual
Page 25: Station list screen (p.48)
48
48
49
CD, Disc, iPod, USB device, SD card
CD, Disc, iPod, USB device, SD card
Navigate
Sets the location information received from
Aha at the destination of navigation.
1
Touch [
] in the control screen.
[
]
Saves the location information.
[Go!]
Sets the location information at the destination
and starts navigation.
Device select
You can display a Device select screen for
device selection.
1
Touch [
] in the control screen.
The Device select screen appears.
Device selection
Bluetooth: Uses the Android smartphone
connected via Bluetooth for an Aha
connection.
Wired: Uses the iPhone connected via the
KCA-iP202 or KCA-iP102 (optional
accessory) for an Aha connection.
NOTE
• If you touch [
] when no device has been
connected, a popup screen that allows device
selection only appears.
• An iPhone connected via Bluetooth cannot be
used for an Aha connection.
• If the volume of Aha received by a Bluetooth
device is too low, raise it on the Bluetooth device.
Station list screen
You can perform the following functions
from this screen.
Selects the station
Touch the station name in the list.
NOTE
• You cannot select iPod as rear source when
you select Aha as main source in dual zone
function.