Kenwood DNX4230TR User Manual

Page 5

Advertising
background image

88

9

Return to the Top page

Basic Operations

Return to the Top page

Basic Operations

DNX5230DAB/DNX5230BT

4 3

1

2

5
6

9

7

8

NOTE

• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,

they may be different from the actual panels.

• In this manual, each model name is abbreviated as follows.

DNX5230DAB and DNX5230BT :

If above icons are showed, read the article applicable to the unit you use.

How to insert a microSD Card

1) Slide the

4

Release key upward to detach the

part of the front panel.

2) Hold the microSD card with the label side facing

left and the notched section up, and insert it
into the slot until it clicks.

To eject the card:

Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.

NOTE

• When detaching a part of the front panel, detach it

toward the front side as shown in the diagram right. If it
is detached upward, the front panel will be broken.

Number

Name

Motion

1

Disc insert
slot

A slot to insert a disc media.

2

0 (Eject)

• Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.

3

fi (Reset)

• If the unit or the connected unit fails to operate properly, the unit

returns to factory settings when this button is pressed

(P.109)

.

• If the Security Indicator (SI) function is turned on, this indicator flashes

when the vehicle ignition is off

(P.80)

.

4

Release key

Detaches the part of front panel.

5

MENU

• Displays the Top Menu screen

(P.19)

.

• Pressing for 1 second turns the power off.
• When the power off, turns the power on.

6

NAV

• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.

7

∞, 5

• Adjusts volume.

8

TEL

• Displays the Hands Free screen

(P.64)

.

• Pressing for 1 second displays the Voice Recognition screen.

(P.72)

9

Input jack

An input jack for external device.

10

microSD
card slot

A slot to insert an SD card. The card is used for upgrading the map.
For how to upgrade the map, refer to the instruction manual of the
navigation system.
Also, you can play audio/visual file in the card.

1

2

10

Advertising
This manual is related to the following products: