Navigation setup, Ound image, P.84) – Kenwood DNX4230TR User Manual
Page 43
84
84
85
Navigation Setup
You can set navigation parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Navigation].
Navigation SETUP screen appears.
4
Set each item as follows.
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: Uses the front left side speaker for
voice guidance.
Front R: Uses the front right side speaker for
voice guidance.
Front All (Default): Uses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is “20”.
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is “ON”.
Changing background image
You can load an image from the connected
USB device and set it for the background
image.
Before operating this procedure, it is
necessary to connect the device which has
the image to load.
1
Touch [Background] in the Display
Menu screen.
Background screen appears.
2
Touch [STANDBY].
3
Touch [Memory] of [User Background].
User Background File Select screen
appears.
4
Select the image to load.
5
Touch [Enter].
The selected image is loaded and the
display returns to the Background screen.
NOTE
• Touching [
] rotates counter clockwise.
• Touching [
] rotates clockwise.
6
Touch [Change] of [Background
Change] in the Background screen.
7
Select an image for background and
touch [Enter].
NOTE
Playable Media and Files (P.110)
for
readable image specifications.
• Touching [Delete] in the Background screen
deletes the background image. After you touch
[Delete], a confirmation message appears. Follow
the message and complete the operation.