Kenwood DNX4230TR - Manual (Page 44)

86 86 87
Return to the Top page
Setting Up
Return to the Top page
Setting Up
Software Information
Check the software version of this unit.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Software].
Software Information screen appears.
4
Confirm the software version. Touch
[Update] as necessary.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
Camera Setup
You can set camera parameters.
1
Touch [Menu] on any screen.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
Rear Camera* 1
Selects the type of rear camera to use.
CMOS-3xx:
When the CMOS-300 series with ID
1 set is connected.
Other (Default): When the other camera is
connected.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <AUD>
or <SCRN>
button for 1 second.
OFF (Default): Switches to the rear view
camera video display when
pressing the <AUD>
or
<TEL>*4 button
for 1 second.
R-CAM Settings* 2
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Front Camera*
1
Selects the type of front camera to use.
CMOS-3xx: When the CMOS-300 series with ID
2 set is connected.
Other: When the other camera is connected.
OFF (Default): When the front camera is not
used.
F-CAM Settings* 3
Adjusts the CMOS-300 series with ID 2 set.
For details, see the instruction manual of your
camera.
*1 These settings become settable only when
the parking brake is on.
*2 This setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
*3 This setting becomes settable only
when the parking brake is on and “Front
Camera” is set to CMOS-300 series.
*4 [TEL Key Longer than 1 Second] must be
set to “R-CAM”. See User interface (P.78)