Kenwood TS-590S - Manual (Page 15)

15
Note: Select from 3/ 5/ 10/ 20/ 30(minutes) excepting OFF, depending on the situation
to use.
● Prohibit transmission setting
If using the host station as a receive-only station, set to transmission inhibited. Make
the settings using the following menu.
Menu No. Function Set value
60 TX inhibit ON
The default setting is OFF.
● Allocating DATA SEND functions to PF keys
Set the DATA SEND functions to the PF keys to test the transmission of audio input
from the rear terminal. In this example, the [PF A] key has been set.
Menu No. Function Set value
79 Front panel PF A key assignment 205
The default value is 200 (VOICE1).
Using the [PF] keys, which set the DATA SEND functions, enables switching between
transmit and receive modes for audio input from the rear terminal.