Kenwood TS-590S - Manual (Page 23)

23
Question Answer
Installation I want to use headsets, USB
headsets, and Bluetooth headsets
on the remote station PC. Will there
be any problems?
You can use them, but in principle, USB
headsets and Bluetooth headsets have
unavoidable delays, so entering
standby will take considerable time. If
the delays are a problem, it is better to
avoid using them.
After connecting USB headsets or
Bluetooth headsets, it is necessary to
set the existing recording and playback
devices using the OS sound properties.
For details, refer to the USB headset
or Bluetooth headset user manual.
Internet Cannot use transceiver operations.
Cannot connect to the host station.
Check that connections to websites and
the internet mail server are possible.
Check the host station address, ID, and
password.
If there are no problems, check the
following.
・
Check that the port used for
wireless control (TCP/default
setting: 50000) is set to open on the
host station broadband router.
・ Check that there are not two or
more broadband routers (hereafter
called "BBR") on the host station
network. If there are two or more
BBRs, either open the port required
by KNS for either of the BBRs, or
stop one of the BBRs and make
sure that only one BBR exists on
the network, and then set the
required KNS port to open on the
BBR. (See Page 28.)
OS When attempting a KNS
connection, a warning message
may be displayed, depending on
the OS. Add ARHP-590 to the Windows firewall
exceptions.