Kenwood TS-590S - Manual (Page 8)

8
3.4. Overview of Remote Station (Operator) Operations
The remote station is configured using a PC connected to the network, and a microphone
and speaker connected to the PC sound function. The audio transmissions for the host
station transceiver are input and output using the microphone and speaker connected to
the sound function of the remote station PC via the network.
The ARCP-590 is installed in the PC. The host station transceiver connected via the
network is controlled by remote station ARCP-590 operations. (See Note.)
Note: To transmit and receive audio, separate VoIP software is required.