Kenwood TS-590S User Manual
Page 24
24
Question
Answer
Why can't I use the ARCP-480?
The ARCP-480 is for the TS-480 only.
Use the ARCP-590 with the TS-590S.
Why can't I use the ARHP-10?
The ARHP-10 is for the TS-480 only.
Use the ARHP-590 with the TS-590S.
Reception quality depends on the
device.
Audio via a network is affected by the
audio encoding and data bandwidth,
and so sound quality may differ from the
actual received quality. These are VoIP
specifications, and cannot be improved.
I want to control peripheral devices
other than the antenna and
transceivers.
The current system is compatible only
with transceiver control.
Operations
There are so many limitations, can
this system operate?
Although different from normal
operations, considerably practical
operations are possible in ordinary
communications.
There may be some initial confusion
over the standby timing until you are
familiar with the specific delays via the
network.
We recommend first becoming familiar
with the transceiver operations from the
PC using a single ARCP-590, and then
attempting operations on a network
environment as the next step.
When attempting actual operations,
unless there are no communications to
a partner, remote internet operations
can be misunderstood.