Kenwood TS-590S - Manual (Page 27)

27
Question Answer
Comprehensive
security
software, etc. I'm using comprehensive security
software, but when I try a KNS
connection, the warning
"Software is attempting to
connect to the internet" is
displayed. Can I press the "Block"
button? Refer to the user manual for the
comprehensive security software
being used, and set it so that the
communications of the port used by
ARCP-590 and ARHP-590 are not
blocked.
After implementing KNS
operations on the PC used as the
host station, the sound has
vanished from the PC during
audio and video playback on the
PC. It is possible that the device
connected to the TS-590S has been
selected as the existing device using
the PC sound functions.
Use the PC sound functions to check
whether the PC speakers have been
selected as the playback device.
When playing audio and video
when implementing KNS
operations on the PC used as the
host device, the audio is
transmitted from the TS-590S. During KNS operations, all audio
output from the PC is input to the
TS-590S as transmitted audio.
During KNS operations, do not play
audio or video. Furthermore, we
recommend waiting until other
programs have ended.
Loud sounds are suddenly output
from the host station transceiver. The cause is the remote station user
operating the volume control.
You can use the ARHP-590 to
prohibit volume operations from the
remote station.
Select the "Tools" menu and the
"Settings", and enable the "Prohibit
AF gain control from ARCP-590"
checkbox.
Other
After restarting the host station for
any reason, are there any
settings to enable standby mode
automatically? In the ARHP-590 "Tools" menu,
select "Settings", and then enable the
"Implement automatically during
Windows startup" checkbox.
When the PC is restarted, it will
automatically enter standby mode.