Kenwood TS-590S - Manual (Page 6)

6
3.3. Host Station (Transmitter) Configuration
Transceiver TS-590S
The TS-590S transceiver is supported. The ARCP-590 and ARHP-590
are specialized for the TS-590S, and so other transceivers cannot be
used to configure the system.
USB
or
RS-232C Controls that change the frequency or mode are performed by
connecting the transceiver and PC using either a USB cable or
RS-232C cable. (The transceiver has only one RS-232C terminal, so if
using the RS-232C terminal for KNS operations, another device
cannot be connected.)
Connection
Audio Created by the customer.
To transmit and receive audio, connect the wireless ACC2 terminal to
the PC sound I/O terminal. For the transceiver terminal specifications,
refer to the device user manual, and for the cable creation and
connection methods, refer to "4.2. Connecting Audio Cables".
Specifications CPU and memory:
Minimum values recommended by the operating system.
HDD:
To install the ARHP-590, a minimum of approx. 100 MB of free disk
space is required. If storing connection logs, additional memory space
is required.
Sound
function To transmit and receive audio, a sound function is required.
PC
Network
function Connects to the internal LAN.
To perform KNS operations via the internet, connect to a network that
is connected to the internet.
A cable network is recommended.
Software OS Use Windows XP (SP3 or later), Windows Vista (SP1 or later, 32-bit
version only), or Windows 7 (32-bit or 64-bit version). Other operating
systems are not compatible.
(Transceiver control)
Transceiver
Sound function
Audio transmission
VoIP software